Westermo TDW-33 - Manual (Page 57)

6618-3202 57
*WRCP – Remote configuration password
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description
This command set remote configuration password. The remote configuration password
decreases the risk of frauding when the remote access is enabled.
If password is left blank a as response to the “C PASSWORD:” promt will give
direct access to the remote online command mode. The remote configuration is reached
through giving the remote access escape sequence consisting of four + signs “++++”
in on line data mode. When the remote modem detects this escape sequence it will
respond with the remote configuration password prompt. “C_PASSWORD:”.
Notice if remote configuration should be accessible when the Secure Callback is enabled
a password must have been set for the remote configuration not to frauding the security.
Syntax:
AT*WRCP=
AT*WRCP=?
AT*WRCP?
Parameters:
Remote configuration password, must be none or 6 to 12 characters long. Only standard
characters are allowed (0-9, a-z)
Command example Possible responses Note
AT*WRCP=QWERTY OK Set remote access pass-
word
AT*WRCP? *WRCP = QWERTY Display current
OK *WRCP password
AT*WRCP=? *WRCP: (0, 6-12 CHAR) Display command
OK parameters