Westermo TDW-33 - Manual (Page 28)

6618-3202 28
*Pn – Store Password and Callback numbers
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description:
Used for storing password and callback number 0 and 1 for the secure callback function.
For compability reasons only. See also AT*WCBTAB
Syntax:
*P:Password:Callbacknumber
Parameters:
0: Information for password 0 and callback number 0
1: Information for password 1 and callback number 1
Secure callback entry password must be none or 6-12 characters. secure callback entry
number can be 0-20 characters.
Command example Possible responses Note
*P0:password:callbacknumber OK
ERROR Otherwise
S register: None
Qn – Result Code Control
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description:
The Q command controls the issuing of result codes sent to acknowledge AT commands
and call status events (e.g. OK, ERROR, RING).
Syntax:
ATQ
Parameters:
0: DCE transmits result codes (default)
1: Result codes are suppressed and not transmitted
Command example Possible responses Note
ATQ0 OK DCE transmits result
codes
ATQ1 OK Result codes are
suppressed and not
transmitted
S register: The value is written to S14 bit 2.