Westermo TDW-33 - Manual (Page 58)

6618-3202 58
*WRCA – Remote configuration activate
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description
This command activate the remote configuration function.
Notice commands also controls the remote access via Generic I/O. The Generic I/O
access is independent of the remote configuration password set with *WRCP command.
Syntax:
AT*WRCA=
AT*WRCP=?
AT*WRCP?
Parameters:
0: Disables Remote Configuration
1: Enables Remote Configuration. (Default).
Command example Possible responses Note
AT*WRCA = OK The command is valid
and accepted
ERROR Otherwise
S register: None
*WRCE – Remote configuration end
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description
This command ends the remote configuration session.
Syntax:
AT*WRCE
Parameters:
None
Command example Possible responses Note
AT*WRCE Ends a remote access
session