Visara eTerm 350 - Manual (Page 52)

4-10 707018-006
e Term 350 Windows-based Terminal
• Connections Preferences
• Baud Rate – Select the desired baud rate.
• Data Bits – Select the desired Data bits.
• Parity – Select the desired Parity.
• Stop Bits – Select the desired Stop Bits
• Flow Control – Select the desired Flow Control.
Call Options Tab
• Call Setup
• Cancel the call if not connected within ___ Seconds – Select this checkbox to
cancel the call if the connection has not be established with the configured amount
of time.
• Wait for dial tone before dialing checkbox – Select this checkbox to ensure that
the modem has recognized a dial tone prior to dialing.
• Wait for credit card tone ___ seconds – Select the desired time in seconds to
wait for a credit card tone.
• Extra Settings (special modem commands may be inserted into the dial string) –
Enter the desire modem commands to be inserted into the dial string.
Printers Tab
If connecting to Windows 2000 Terminal Services (with RDP client) and a printer is
attached locally to the eTerm 350, then configure the printer by clicking on the Add
button. Enter a name for the printer and select the Manufacturer and Printer Model. If
the printer is to be used as the default Windows printer, check the “Make this the default
printer” box. After this tab is configured and the user connects and logs into the Windows
2000 server, the configured printer will automatically appear in the Printers folder on
the server.