Visara eTerm 350 - Manual (Page 48)

4-6 707018-006
e Term 350 Windows-based Terminal
Manually Assigning a Static IP Address
• Press [F2] to display the Terminal Properties property sheet.
• Select the Network tab.
• Select Specify an IP address.
If the method you selected on the prior screen was to enter a static IP Address, the
screen below will appear. You will be required to enter the following information onto
the screen. You may find it helpful to acquire this information from your system
administrator. Supply the following network information.
• IP address:
Required for identifying this unit to the network. The format will follow the standard
addressing format.
• Subnet Mask:
Required for designating which network the IP Address is a part of.
• Gateway:
Optional address that identifies the machine through which a subnet communicates
with another network
• Click Apply or OK to save your changes or Cancel without saving to quit the
dialog box.
Configure Terminal Name
This field contains the name that will be used by Windows 2000 Terminal Services
when configuring a local-attached printer. The default is WBT followed by the MAC
address. Example: WBT00009901DABC