Visara eTerm 350 - Manual (Page 10)

1-4 707018-006
e Term 350 Windows-based Terminal
Installation
Connecting the Terminal
Follow these instructions to connect the terminal to its peripheral devices:
1. Connect the monitor to the video connector.
2. Connect the keyboard to the keyboard connector.
3. Connect the mouse to the mouse connector.
4. Connect the 10/100-TX network cable to the RJ-45 network connector.
5. Connect the power cord to the power connector with an AC outlet.
(Refer to the installation figure and the connector descriptions shown below.)
to Power
AC Outlet
to Printer
to Monitor
PS/2 Mouse
to Serial Device
P/S2 Keyboard
to Network
Audio line out
Powering On the Terminal
When you have made all the connections, turn on the terminal by pressing the power
switch and turn on the monitor.
Power Switch