Visara eTerm 350 - Manual (Page 15)

707018-006 2-3
Chapter 2. e Term Setup Wizard
Specify a Static IP Address
If the method you selected on the prior screen was to enter a static IP Address, the
screen below will appear. You will be required to enter the following information onto
the screen. You may find it helpful to acquire this information from your system
administrator. Supply the following network information:
• IP address
Required for identifying this unit to the network. The format will follow the standard
addressing format.
• Subnet Mask
Required for designating which network the IP Address is a part of.
• Gateway
Optional address which identifies the machine through which a subnet communicates
with another network.
Complete the information and click Next.
Note: Specify a static IP Address. The Subnet Mask will default to 255.255.255.0.