Visara eTerm 350 - Manual (Page 43)

707018-006 4-1
Chapter 4. e Term Terminal
Properties
Terminal Properties
Under a normal operation, you can press the [F2] key to reset the terminal properties at
any time. There are eleven property sheets for you to modify the terminal properties.
General
This sheet provides you the general information of the terminal. Click OK or Cancel to
quit the dialog box.
Configuring the Unit via Terminal Properties
When you start your unit the first time, or reset factory defaults, or when the terminal
recovers flash software, the Setup Wizard leads you through the process of setting
essential parameters, including the IP address, name resolution, and display
characteristics.
After you have performed initial configuration through the Setup Wizard, you can
modify configuration setting through the Terminal Properties property sheet.
Accessing the Terminal Properties Property Sheet
By default, you are able to display the Terminal Properties property sheet by pressing [F2]
when displaying the Terminal Connection Manager screen.