Visara eTerm 350 - Manual (Page 37)

707018-006 3-15
Chapter 3. e Term Terminal Connection
• Use Printer Configuration Utility:
Check this option if a printer is local-attached to the unit and connecting to a Winframe
or Metaframe 1.0 Citrix server. This option should be unchecked if connecting to a
Metaframe 1.8 Citrix server.
• Compress Data Stream:
Reduces the amount of data transferring between the terminal and server.
• Enable Sound:
Check this option to enable sound support. Published applications will be able to
play sounds on your client.
• High - This value provides the greatest audio quality but should only be used
when bandwidth consumption is not a concern.
• Medium - Using this value results in less bandwidth consumption than when
using High. Compression of sound data provides greater bandwidth efficiency
but reduces sound quality somewhat. This value is recommended for most LAN-
based connections.
• Low - This value offers the most efficient use of bandwidth but also decreases
sound quality severely. This value is recommended for low-bandwidth connections,
including most modem connections.
• Encryption level:
Select the level of encryption for the ICA connection. The default level is Basic.
Strong encryption using the RC5 algorithm is available with SecureICA Services.
SecureICA Services enables RSA RC5 encryption with 40, 56, or 128-bit session
keys. Select RC5 128-bit Login Only to use encryption during authentication.
The Citrix server must be configured to allow the selected encryption level or greater.
For example, if the Citrix server is configured to allow RC5 56-bit connections, the
ICA client can connect with RC5 56 or 128-bit encryption.
Note: Selecting RC5 encryption disables automatic logon to the Citrix server.