Introduction, Assembly drawing, Introduction -1 – Visara SCON-20L Reference Manual User Manual
Page 35: Assembly drawing -1
707043-005
5-1
Chapter 5. Assembly Installation/
Removal/Replacement
Introduction
Both members of the 20L/22L family utilize the same chassis. The following
procedures describe the removal/replacement of assemblies that may be installed
in the 20L/22L unit. Note that access under the covers by unauthorized persons or
by persons not under supervision of authorized persons, may void any warranty
of the unit.
Prior to any removal or replacement procedure, make sure the Console
Concentrator is turned OFF and the power cord is disconnected from the AC wall
outlet. Ensure all cabling is properly identified and marked before proceeding
with any removal procedures.
WARNING: Due to electrical hazard, do not remove the system cover. Only
qualified service personnel may remove the system cover for service or installation
of circuit cards.
Assembly Drawing