Visara SCON-20L Reference Manual - Manual (Page 31)

707043-005 4-7
Chapter 4. Operation
MOV indicates that the diagnostic code a processor board moved to its local
memory does not match the code from where it was moved.
* indicates additional messages that give more information about the error.
The LINCS Problem Determination manual contains additional information about
Hardware failures.
Online Errors
Online errors show problems that occur while the Console Concentrator is online with
its host and attached devices. Online error numbers may appear on the operator panel
(some 300- and 500-type errors only), preceded by an indication of which attached host
system is involved, and may be displayed on an attached display’s status line preceded
by X. The LINCS Problem Determination manual describes Online errors and
recovery procedures.
Online errors are recorded into the Central Control Mode Event Log (utility 7/1).
Error Indicators
Event Log
The Console Concentrator’s Event Log records the Online errors described in LINCS
Problem Determination/EventLog.
Status Line of Attached Terminal
The status line of attached terminals shows many of the Online errors that
occur. The LINCS Problem Determination manual contains additional
information about Online errors.
Operator Panel Display
The 16-character operator panel LCD display indicates a wide variety of Console
Concentrator states and errors. The operator panel LCD display shows most error
conditions except:
• An error occurring in IML before the operator panel is initialized.
• Certain Online errors.
Operator Panel Check Light
The operator panel Check Light is located on the operator panel. When it is lit, an
error or failure has occurred that requires corrective action.