10/100 mbps fast ethernet (fet), 10/100 mbps fast ethernet (fet) -8, Scon-20l/22l hardware reference manual – Visara SCON-20L Reference Manual User Manual
Page 16: Figure 2-2. esc faceplate bracket
2-8
707043-005
SCON-20L/22L Hardware Reference Manual
3. Vary “online” the host channel.
4. A “505-01” connection code on the 20L/22L display indicates that proper
communication is established. A “503-02” connection code on the 20L/22L display
indicates that proper communication is not established. Connection problems may
exist if the plug does not click when placed into the ESC receptacle. Ensure the
ESCON plug is not loose.
ESC
HR-00
220272-909
R
T
SERIAL
IRQ
FAIL/ERR
ACTV
ONLN
ESCON
CONNECTOR
ON LINE LED
FAIL / ERROR LED
SERIAL PORT
RECEIVE LED
INTERRUPT
REQUEST LED
ACTIVE LED
SERIAL PORT
TRANSMIT LED
SERIAL PORT
CONNECTOR
DEBUG SWITCH
Figure 2-2. ESC Faceplate Bracket
10/100 Mbps Fast Ethernet (FET)
The single RJ-45 connector on the FET card supports 10 Mbps or 100Mps speeds.
NWAY auto-negotiation enables the 10/100Mbps Ethernet NICs to automatically run at
the speed that the connected hub supports. The 10/100Mbps Ethernet NICs works with
products that comply with IEEE 10BASE-T and 100 BASE-TX specifications.