Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 57)

F r o n t P a n e l I n t e r f a c e 4-1
C H A P T E R
4
C HAPTER 4
F
RONT
P
ANEL
I
NTERFACE
Introduction
This chapter describes the LED status indicators and control buttons
associated with the WANsuite 5650’s front panel interface.
Description of Front Panel
The front panel of the WANsuite 5650 is shown below. It features nine LED
status indicators and four user-activated control buttons.
Figure 4.1 Verilink WANsuite 5650 Front Panel
The following sections describe the functions of the LED indicators and the
control buttons.
Front Panel Buttons
The WANsuite 5650’s front panel control buttons are described in the
paragraphs below.
Port Select Button
The WANsuite 5650’s ports are defined as SHDSL, G.703, and (serial) Nx64k
port interfaces. The
PORT SELECT button is used to cycle through and select
from the available ports. When a particular port is selected using the PORT