Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 52)

3-30 W A N s u i t e 5 6 5 0
TDM Service Details Screen
Selecting the Channels function field from the SHDSL screen will display the
TDM Service Details screen (Figure 3.24).
Figure 3.24 TDM Service Details Screen
This screen is used to view and set the TDM service parameters. Each
channel (0–31) is listed along with its configured Service number, Pair, and
Idle Pattern. (Use the PageUp or PageDown commands to view channels not
displayed.) The user can change the values for a channel’s Service or Idle
Pattern by navigating to the desired field and entering the appropriate value.
S erv ice This field is used to provision the service number of the selected channel.
Values: 0, 3, 4, 7, 8
Id le P a ttern This field is used to provision the idle pattern of the selected channel. Values
are represented in hex format.
Values: 0 (zero) to FF