Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 51)

V T 1 0 0 I n t e r f a c e 3-29
Service Details Screen
Figure 3.23 Service Details Screen
This screen allows the user to select and change the service parameters listed
below. The new parameters are saved when you press the “Esc” key and
return to the previous screen.
In terfa ce Selecting one of the available options provided in the “Interface” field will set
the interface parameter for the current service.
Typ e Selecting one of the available options provided in the “Type” field will set the
type parameter for the current service.
P air User-assigned integer field that specifies where to route the traffic from this
service. If the service is terminated by the unit, set this value to “0” (zero).