Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 34)

3-12 W A N s u i t e 5 6 5 0
Alarm Profiles Screen
Selecting the “Alarm Profiles” option on the SHDSL screen will display the
following screen:
Figure 3.9 Alarm Profiles Screen
The Alarm Profiles screen displays the current status of endpoint alarms.
Information is displayed for the following alarm parameters:
A larm P rofile N a m e This field displays the unique index associated with this Endpoint Alarm
profile. The values are obtained from the alarm configuration profile
referenced by this object.
L oop A tten This field indicates the loop attenuation threshold
S N R M argin This field indicates the SNR margin threshold.
E S This field indicates the errored seconds threshold.
S E S This field indicates the severely errored seconds threshold.
C R C This field indicates the CRC anomalies threshold.
L O S W S This field indicates the LOSW second threshold.
U A S This field indicates the unavailable seconds threshold.
The parameters for each Alarm Profile can be changed by moving the cursor
to the desired Profile name and pressing the “Enter” key; this will display an
Alarm Profile Details screen (Figure 3.10) for the selected profile. The
available configuration parameters are described below.