Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 43)

V T 1 0 0 I n t e r f a c e 3-21
The G.703 configuration screen provides the user-selectable prompts
described in the table below.
P erform an ce The Performance prompt near the bottom of the G.703 configuration screen
displays a 24-hour performance summary screen (Figure 3.16), which
provides a summary of the error events that have occurred on the G.703
interface during each interval of the past 24 hours.
CAUTION: Performance data will be lost upon power cycle or after performing a
Maintenance Reset/Restart.
Figure 3.16 G.703 Performance 24-Hour Screen
To view a screen showing performance details for only a given 15-minute
period in the current 24-hour statistics, use the cursor to highlight the desired
period (Summary, Current, or Interval x) and press the “Enter” key. A screen
like the one below (Figure 3.17) will be displayed.
Prompt Function
Clear Alarms Resets the alarm conditions and counts to zero.
Performance Displays a current count of the number of error events that have
occurred over the past 24 hours.
Channels Displays the TDM Service Details screen (Figure 3.24 on
page 3-30), showing each channel by index number. Each
channel’s service (by number) is displayed and can be changed
through user input.