Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 32)

3-10 W A N s u i t e 5 6 5 0
Configuration Profiles Screen
Selecting the Configuration Profiles function field from the SHDSL screen
will display the following screen:
Figure 3.7 Configuration Profiles Screen
This screen is used to view the available SHDSL span configuration profiles
(by profile name) and their established parameters. Each of the three
available configuration profiles represents a span configuration profile in the
Span Configuration Profile Table, which applies to this span.
Displayed parameters for each span configuration profile include the
following:
C on figu ratio n N a m e Displays the name of the defined span configuration profile.
R ate (M in ) Displays the minimum attainable line rate in the span.
R ate (M ax ) Displays the maximum attainable line rate in the span.
R em ote Shows whether the option to span remote is enabled or disabled.
P ow er F eed in g Shows whether support for optional power feeding in a SHDSL line is
enabled or disabled.
The user may view and change the details for a configuration profile by
moving the cursor to the desired profile name and pressing the “Enter” key.
(A Configuration Details screen like the one in Figure 3.8 will be displayed.)
Configuration Details Screen
The Configuration Details screen (Figure 3.8) is accessed by selecting a
profile name from the Configuration Profiles screen and pressing the “Enter”
key.