Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 25)

V T 1 0 0 I n t e r f a c e 3-3
entry to be replaced by the new characters. To edit an existing entry rather
than replace it, press the right arrow key to move the cursor to the point that
needs editing. You may insert characters or delete them. Typed data must
always be inserted rather than typed over. If the field is full, you must first
delete at least one character before you can add another.
Table (column) headings enclosed with braces < > indicate that any entry in
that column is selectable. (See Figure 3.7 on page 3-10 for an example.)
NOTICE: The VT100 screens are automatically refreshed every 5 seconds.
However, you may also press Ctrl+U to refresh data on any screen.
Main Menu and Menu Structure
The Main Menu screen (shown in Figure 3.2) lists the functional user-
accessible menus. To activate a specific menu, tab to it (or use your arrow
keys) and press “Enter.” To exit this or any subsequent menu, press the “Esc”
key. If you exit the Main menu, the terminal interface program terminates.
This is a valid way to end a session. When you exit any menu other than the
Main menu, you will be returned to the previous screen.
Figure 3.2 VT100 Main Menu Screen
CAUTION: If you do not enter a keystroke for 10 minutes, the terminal interface
logs off automatically.