Open, Silence, Open cut silence – Teac 2488 User Manual
Page 53: 4 – recorder
4 – Recorder
TASCAM 2488
User’s Guide
53
OPEN
This function “opens up” a silent gap between the IN
and OUT points on the chosen track or tracks.
The source and destination are the same, and after the
operation, the track is split at the IN point, with the
material which followed the IN point now moved to
follow the OUT point. The result is therefore longer
than the original.
There is only one value that you can change:
Src. Trk
Select an individual track (
1
through
24
), a
pair of tracks (
1/2
,
3/4
,
5/6
, etc.), all of the tracks (
1-24
)
or all tracks, including the virtual tracks (all).
Press
YES
to perform the operation or
NO
to leave
this screen.
CUT
This function deletes the material between the IN and
OUT points on the chosen track or tracks and “closes
up” the gap.
The source and destination are the same, and after the
operation, the material which followed the OUT
point now moved to follow the IN point. Material
which was between the IN and OUT points is
deleted. The result is therefore shorter than the
original.
There is only one value that you can change:
Src. Trk
Select an individual track (
1
through
24
), a
pair of tracks (
1/2
,
3/4
,
5/6
, etc.), all of the “real”
tracks (
1-24
) or all tracks, including the virtual tracks
(
ALL
).
Press
YES
to perform the operation or
NO
to leave
this screen.
SILENCE
This function is equivalent to recording silence
between the IN and OUT points on the chosen track
or tracks.
No material is added or deleted, and the length of the
result is therefore the same as that of the original.
There is only one value that you can change:
Src. Trk
Select an individual track (
1
through
8
), a
pair of tracks (
1/2
,
3/4
,
5/6
, etc.), or all the tracks (
1-
24
).
Press
YES
to perform the operation or
NO
to leave
this screen.
NOTE
You can also use the
SHIFT
+
DELETE
key combina-
tion to enter this function easily.
OUT
IN
OUT
IN
OUT
IN
IN
OUT
OUT
IN
IN