1 – setting up and introduction – Teac 2488 User Manual

Page 18

1 – Setting up and introduction

TASCAM 2488

User’s Guide

Adjust the tone of the guitar, by
pressing the

SELECT

key of channel

1, and then pressing the

key.

Use the cursor keys and the wheel to
move around the display and change
values. The settings are shown as
numbers and as a graph.

Use the on-screen

on the left side

of the display (or press and hold

SHIFT

and press

) to compare the

sound with and without the equaliza-
tion.

Press and hold down the

RECORD

key and press the

PLAY

key. The

PLAY

and

RECORD

indicators above

the transport keys both light, and the

REC

key of track 1 lights solidly.

The metronome you set up earlier
starts to play, and you can play your
rhythm part along with it, recording
as you go.

Press the

STOP

key when you are

finished.

To return to the zero position, where
your song began, press and hold the

STOP

key, and press the

REW

key

(marked as

RTZ

—“return to zero”).

When you’ve finished recording,
press channel 1’s

REC

key to safe the

track.