Teac HS-20 - Manual (Page 73)

TASCAM HS-20
73
9 – Playlist mode
Editing the playback starting time
1. Press the HOME key on the front panel to open the Home
screen.
2. Touch the ADJUST ENTRY button on the pull-down menu
that is opened by touching the file name button or the title
name button.
The ADJUST ### screen opens. (“###” is the entry number.)
NOTE
You can also open this screen by touching the MENU button
and then touching the ADJUST button on the pull-up menu
when a take is selected on the ENTRY list screen or one of the
key assign buttons on the left is selected on the ASSIGN file
screen.
3. Touch the Start TC Fade/Level tab to open the screen shown
below.
4. Touch the EDIT button to open the EDIT START TC screen,
and use the number buttons to change the Start TC.
5. The value shown next to the Start TC item is the playback
starting time for the selected entry. Touch the EDIT button
for the START TC item to open the EDIT START T/C screen
where you can change the playback starting time.
Use the FRAME EDIT button on the EDIT START T/C screen to
set whether or not you will edit the frame value.
6. Use the number buttons to input the entry playback start
time.
o If you begin input without selecting a unit, input will start
from the smallest one.
o To input a specific unit, touch it to make its background
yellow, and then use the number buttons or the DATA dial
to enter two digits at a time.
o Touch the CURRENT b button to copy the current
timecode time to the input value.
o Touch the CLEAR button to erase all entered values.
7. Touch the ENTER button to confirm the setting.
TIP
• You can also use the PLAY key and other transport keys
while listening to the audio to find the location, and then
touch the CURRENT b button to input that value here.
• This can also be input using a connected keyboard.
Press the keyboard’s ESC key to clear all the values.