Undoing the previous edit (undo), Redoing an edit (redo), 7 – timeline mode – Teac HS-20 User Manual

Page 54

TASCAM HS-20

7 – Timeline mode

Undoing the previous edit (UNDO)

You can undo the previous timeline edit.

1. Press the HOME key on the front of the unit to open the

Home screen.

2. Touch the EDIT MODE button to enter edit mode.
3. Touch the EDIT button to open the pull-up menu.

4. Touch the UNDO button on the pull-up menu. After the

edit is undone, the Home Screen will open after a pop-up

window is shown.

In this case, the EDIT pull-up menu will remain open.

NOTE

• The UNDO button on the Fade/Level pull-up menu can also

be used to undo an edit.

• If no editing has been conducted, the UNDO button is

disabled. The UNDO button appears with white letters when

it is possible to undo an edit.

• The timeline mode can store up to 10 of the most recent

recording/editing operations. You can undo and redo

editing within this editing history range .
However, when the frequency of editing or the number of

regions increases, the number of operations that can be

stored might decrease to less than 10.

• The timeline mode editing history will be erased by the

following actions.

• Turning off the unit

• Loading a folder

• Loading AES31 editing information

• Changing the operation mode

Redoing an edit (REDO)

After undoing an edit, you can redo it.

1. Press the HOME key on the front of the unit to open the

Home screen.

2. Touch the EDIT MODE button to enter edit mode.
3. Touch the EDIT button to open the pull-up menu.

4. Touch the REDO button on the pull-up menu. When the edit

is redone, the Home Screen will open after a pop-up window

is shown.

In this case, the EDIT pull-up menu will remain open.

NOTE

• The REDO button on the Fade/Level pull-up menu can also

be used to redo an edit.

• If no edit has been undone, the REDO button is disabled. The

REDO button appears with white letters when it is possible

to redo an edit.