Changing a playlist name later, 9 – playlist mode – Teac HS-20 User Manual

Page 66

TASCAM HS-20

9 – Playlist mode

4. When a confirmation message pop-up appears, touch the

OK button or press the DATA dial to confirm the playlist

name.

While the playlist is being created, a progress status pop-up

appears.
When playlist creation completes, the pop-up disappears.

NOTE

• Immediately after a new playlist is created, it becomes the

current playlist (currently loaded playlist).

• A new playlist can also be created by touching the CREATE

PLAYLIST button on the pull-down menu that appears when

an entry name button is touched on the Home Screen.

• “C” (current) appears inside the

icon of the currently

loaded playlist.

Changing a playlist name later

You can change playlist names later.

1. Press the FILE LIST key on the front of the unit to open the

playlist selection screen.

2. Select the playlist with the name that you want to change.

The background of the selected playlist name appears

yellow.

3. Touch the MENU button to open a pull-up menu.

4. Touch the EDIT NAME button in the pull-up menu to open

the PLAYLIST NAME screen.

NOTE

The EDIT NAME button in the pull-up menu cannot be

selected if the loaded playlist is selected.

5. Input the playlist name. Follow the procedures “Editing the

6. Touch the Enter button on the PLAYLIST NAME screen or

press the DATA dial to confirm the playlist name and return

to the playlist selection screen.