Teac HS-20 - Manual (Page 124)

124
TASCAM HS-20
17 – Specifications
8 DIGITAL OUT (S/PDIF)
Connector: RCA pin jack
Output voltage: 0.5 Vpp ±20%/75 Ω
Input impedance: 75 Ω
Format: IEC60958-3 (S/PDIF)
Supported sampling frequencies:
44.1/48/88.2/96/176.4/192 kHz (Single/Double/Quad)
8 DIGITAL OUT (AES/EBU)
Connector: XLR–3–32
Output voltage: 2–5 Vp–p/110 Ω
Output impedance: 110 Ω ±20%
Format: IEC60958–4 (AES3–2003, AES/EBU)
Supported sampling frequencies:
44.1/48/88.2/96/176.4/192 kHz (Single/Double/Quad)
Control input/output ratings
8 RS–422 (attached with optional SY-2 board)
Connector: D–sub 9-pin (female, inch specification)
8 RS–232C
Connector: D–sub 9-pin (female, inch specification)
8
PARALLEL
Connector: D–sub 25-pin (female, inch specification)
8
TIMECODE IN (attached with optional SY-2 board)
Connector: BNC
Signal voltage amplitude: 0.5–5 Vp–p
Input impedance 10 kΩ
Format: SMPTE 12M–1999 compliant
8
TIMECODE OUT (attached with optional SY-2 board)
Connector: BNC
Signal voltage amplitude: 2 Vp–p
Output impedance: 600 Ω
Format: SMPTE 12M–1999 compliant
8
WORD/VIDEO IN
Connector: BNC
Input voltage: 5V TTL equivalent (WORD IN)
Signal voltage amplitude: 1 Vp–p (VIDEO IN)
Input impedance: 75 Ω ±10%
Allowable frequency deviation of external synchronization:
±100 ppm
Includes switch for enabling termination
Input frequencies (WORD):
44.1/48/88.2/96/176.4/192 kHz
Input signal (VIDEO):
24/25/29.97/30 Frame
(NTSC/PAL Black burst, HDTV Tri–Level)
8
WORD/VIDEO THRU/OUT
Connector: BNC
Signal voltage amplitude: 5V TTL equivalent
Output impedance: 75 Ω ±10%
Output frequency (WORD):
44.1/48/88.2/96/176.4/192 kHz
Frequency stability ±10 ppm or less (Ta = 20º C)
OUT/THRU switch included (OUT is only for WORD OUT)
8 ETHERNET
Connector: RJ45
Compatibility: 100BASE-TX, 1000BASE-T
8 KEYBOARD
Connector: Mini-DIN (PS/2)
8 USB
Connector: USB A-type 4-pin
Protocol: USB 2.0 HIGH SPEED (480 Mbps) compliant
8 REMOTE
Connector: RJ45
Supply voltage: 13 V
Signal: LVDS serial