Teac DR-680MKII - Manual (Page 7)

TASCAM DR-680
7
1 – Introduction
Thank you very much for purchasing a TASCAM
DR-680MKII Portable Multitrack Recorder. Please read
this manual thoroughly before using the unit so that you
understand correct operating procedures and can use its
functions fully. We hope that you enjoy using this unit for
many years.
Please keep this manual so that you can read it at any time.
A digital copy of this manual can also be downloaded from
the TEAC Global Site (http://teac-global.com/).
Features
• 8-track recording with a resolution of up to 24-bit, 96
kHz (6 analog inputs with stereo mix, or 6 analog inputs
with digital stereo input)
• 2-track recording resolution of up to 24-bit, 192 kHz
• Recording/playback media: SD/SDHC/SDXC cards (up to
128 GB)
• Recording/playback formats: BWF, WAV, MP3
• Recording up to 4 tracks in MP3 format simultaneously
possible
• Sampling frequencies: 44.1 k, 48 k, 96 k and 192 kHz
• Quantization rates: 16-bit, 24-bit
• MP3 files can be recorded at resolutions of
96/128/192/320 kbps
• 6 balanced mic/line inputs (1–4 are XLR/TRS combo jacks
and 5–6 are TRS jacks)
• Mic inputs can provide +48V phantom power
• Limiters on each input can automatically adjust their
levels appropriately if input levels are too high
• Low-cut filters on each input are useful for reducing
low-frequency noise
• 6 unbalanced line outputs (RCA pin jacks)
• S/PDIF and AES/EBU digital input and output (coaxial)
• Supports MS mic decoding
• Cascade function allows the transport of multiple
DR-680MKII units to be controlled by a single master unit
• Pre-record function allows up to 2 seconds of input
before the start of recording to be captured
• Auto-record function allows the unit to start recording
automatically when it detects a set sound input level
• Mark function allows movement to specific playback
positions
• Button lock function can be used to prevent
misoperation
• Repeat playback function
• Mixer for monitoring with level and pan controls
• User can start a new take at any time without
interrupting recording
• Take names can be based on a word set by the user or
the date
• 500-mW monaural output speaker built-in
• 50-mW + 50-mW headphones output
• Operates on power from 8 AA batteries or an AC adaptor
(GPE248-120200-Z)
• LCD with 128 x 64 pixel resolution and a backlight
• USB2.0 port
• USB cable included
Items included with the product
The DR-680MKII package contains the following items.
Take care when opening the package not to damage the
items. Keep the package materials for transportation in the
future.
Please contact the store where you purchased this unit
if any of these items are missing or have been damaged
during transportation.
• Main unit ..................................................................................×1
• AC adaptor (GPE248-120200-Z) .......................................×1
• USB cable .................................................................................×1
• Shoulder strap ........................................................................×1
• Owner’s manual (this document) ...................................×1
The warranty is included at the end of English manual.
CAUTION
Always use the included AC adapter (GPE248-
120200-Z) with this unit. Never use the included AC
adapter with any other device. Doing so could cause
damage, fire or electric shock.
NOTE
The included AC adapter (GPE248-120200-Z) is
shipped with exchangeable outlet plugs. For details
about changing the outlet plug, see page 21.
Conventions used in this manual
The following conventions are used in this manual.
• “SD card” indicates SD, SDHC and SDXC memory cards.
• When we refer to a button or connector or control on
the DR-680MKII, the typeface looks like this: MENU.
• When we show messages, for example, that appear on
the screen, the typeface looks like this:
BROWSE
.
• Additional information is provided as necessary in tips,
notes and cautions
TIP
These are tips about how to use the unit.
NOTE
These include additional explanations and special
cases.
CAUTION
Failure to follow these instructions could result in
injury, equipment damage or lost data, for example.