Teac DR-680MKII - Manual (Page 56)

56
TASCAM DR-680MKII
12 – Specifications
Digital audio input and output
DIGITAL/SYNC IN jack
Connector: RCA pin jack
Format: IEC60958-3 (S/PDIF) or AES3-2003/IEC60958-4
(AES/EBU) automatically determined
DIGITAL/SYNC OUT jack
Connector: RCA pin jack
Format: IEC60958-3 (S/PDIF) or AES3-2003/IEC60958-4
(AES/EBU) set by user
Control input and output
USB connection
USB port connector: Mini-B type
Format: USB2.0 HIGH SPEED (480 Mbps)
Audio performance
(From LINE IN to LINE OUT, Input level = FS –1 dB)
Frequency response
20 Hz-20 kHz +0.5/–1.5 dB (44.1 kHz)
20 Hz-20 kHz +0.5/–0.5 dB (48 kHz)
20 Hz-40 kHz +0.5/–1.0 dB (96 kHz)
20 Hz-80 kHz +0.5/–5.0 dB (192 kHz)
Distortion
0.007% (1 kHz)
S/N ratio
100 dB (A-weighted)
Other specifications
Power supply
8 AA batteries (alkaline, NiMH or lithium)
AC adaptor (GPE248-120200-Z, 100-240V, 50-60 Hz,
included)
Power consumption
100-120V: 9W (When phantom power ON and GPE248-
120200-Z AC adaptor used)
220-240V: 9.5W (When phantom power ON and
GPE248-120200-Z AC adaptor used)
Battery operation time (when used continuously)
Alkaline batteries (EVOLTA)
About 3.5 hours (6 channels of phantom power
used, 3 mA per channel)
About 4.5 hours (2 channels of phantom power
used, 3 mA per channel)
About 6 hours (phantom power not used)
NiMH batteries (eneloop)
About 4 hours (6 channels of phantom power used,
3 mA per channel)
About 4.5 hours (2 channels of phantom power
used, 3 mA per channel)
About 5.5 hours (phantom power not used)
Lithium batteries (Energizer Ultimate Lithium)
About 7.5 hours (6 channels of phantom power
used, 3 mA per channel)
About 9.5 hours (2 channels of phantom power
used, 3 mA per channel)
About 11 hours (phantom power not used)
Dimensions (width x height x depth)
216.4 x 56 x 188.4 mm
8.52 x 2.21 x 7.41 in
Weight
1.2 kg/2.646 lb (without batteries)
Operating temperature range
0–40º C/32–104º F