Erasing marks, Pre-recording, 4 – recording – Teac DR-680MKII User Manual

Page 36

TASCAM DR-680MKII

4 – Recording

Erasing marks

Press the ENTER/MARK button on the top of the unit to

delete a mark added at the current position.

NOTE

If you erase a mark during playback, the mark is

not immediately erased, but rather is erased when

playback stops. If you change the take using the m

[.] or , [/] button without stopping, the

erasure of marks is not completed.

Pre-recording

When the unit is in recording standby, the unit can record

up to two seconds before the start of recording and

include it in the recording.
1. When the Home Screen is open, press the FUNCTION

button to open the Functions Screen.

2. Use the VALUE/MARK knob to move the cursor and

select the

PRE.REC

menu item.

3. Press the VALUE/MARK knob to turn pre-recording ON

or OFF.
If pre-recording has been turned ON, the

PRE.REC

indicator appears with a dark background.

4. When you have finished making the settings, press the

HOME/DISP button to return to the Home Screen.

TIP

Used in combination with the auto-record function,

you can capture recordings without losing the initial

sound.

NOTE

If the unit has been in recording standby for less than

two seconds, only the amount of time that the unit has

been in standby can be recorded.