Super Systems 9200 User Manual

Page 47

Model 9200 Programmable Dual-loop Controller

SSi Manual SERIES 9200

47 Programmable Dual-loop

IR MV action

turns off sample only

IR temperature source

probe temperature

IR shim factor

150

IR CH4 factor

IR CO adjust factor

200

Sample Recipe - % Carbon and Temperature (Batch Furnace)

Standard Event Assignments

To simplify operation and maintain consistency, SSi has adopted the following event assignments.

Event 0

Program Alarm

Event 1

End of Cycle

Event 2

Ammonia

Event 3

Plunge Cool

Event 6

Quench Speed

Event 7

End of Quench

Events 0, 6, and 7 are fixed assignments in the SERIES 9200.

Step No OPT

CODE TEMP ATM OPTIONS

S1 SET

PT 1700

WAIT

S2 SET

PT 1700 .85 WAIT

S3 SOAK

4.0

S4 EVT-OUT

3 – ON

S5 TC-INQ 1565

WAIT

DOWN

S6 DELAY

S7 EVT-OUT

3 - OFF

S8 SET

PT 1550 .70 WAIT

S9 SOAK

1.0

S10 EVT-OUT

1 - ON

S11 ALARM

S12 EVT-OUT

1 - OFF

Flash Card Management

This section will show the user how to pull logged data from an Advantech screen and view it on the PC

using a flash card reader and SD Recorder. This option requires SDRecorder to be installed on the local

computer. If SDRecorder is not installed, see the section

SDRecorder Installation

for instructions on how to

install the SDRecorder software. If SDRecorder is installed, continue on with these instructions.

1. Shut down the screen software. To shut down the screen software, press the Menu button from

the Default Display Screen. This will display the

Configuration

menu list. Select the

Shutdown

menu option and confirm the shutdown process. See the section

Shutdown

in the

Chapter 2 –

Configuration

section of this manual for more information on shutting down the screen software.

2. When the Windows desktop is visible, turn off the screen using the power switch located on the

back of the screen just above the power connector.

3. Remove the compact flash card from the top rear of the screen.

Note – Be sure to remember the

orientation of the compact flash card with respect to the screen. The compact flash card will only

fit into the screen one way

4. Read the flash card with a compact flash card reader onto a PC. Copy the contents of the

“\SSi\COMP\ folder and the \SSi\LOG\ folder into a folder on the PC.

Note – The location of this