Super Systems 9200 - Manual (Page 17)

Model 9200 Programmable Dual-loop Controller
SSi Manual SERIES 9200 17 Programmable Dual-loop
Auxiliary Instruments (Read-only)
The Auxiliary Instruments Display shows the
following information:
The instruments slaved to the Series 9200 and their
process variables.
Auxiliary Analog Input (Read-only)
The Auxiliary Analog Input Display shows the
information from any attached analog input
modules such as: load T/C’s, flows from Waukee-
Tronic flow meters, etc.
Shutdown (Display)
The Shutdown selection pops up another screen asking whether or not you wish to shutdown the interface
with the Series 9200. Two responses are possible Yes or No.
When you shutdown the ADVANTECH interface, the SERIES 9200 controller is still functioning. You can
monitor it by connecting the ETHERNET connection to a laptop computer, using Internet Explorer, and
assigning a legitimate IP address.
“Yes” shows you a typical computer screen with the Start button in the bottom left-hand corner. You can
now turn the power off to the operator interface without upsetting any of the settings. The “No” response
returns you to the initial Status Screen. Shutting down the Operator Interface does not shutdown the Series
9200 Controller .
Adjust Date and Time
Pressing Enter moves you to screen Clock setup.
Highlighting the date and pressing Enter moves you to a screen Date Edit.
The current date in the Series 9200 is displayed as well as the date on a scroll type display. Touching the
individual parts of the date [day (Monday, Tuesday, etc.), month, and year] will highlight that portion of
the date, and using the little up and down arrow keys will allow you to adjust the highlighted value.