Seaward Supernova - Manual (Page 66)

How to upload test details to your Supernova
56
to return to the previous menu or press the Yes fast key to perform
the delete operation and return to the previous menu.
Note:
Deleting Appliances in this way will delete all of the matched
appliances across all of the Sites and Locations.
When a single appliance is deleted it is not removed from
memory but hidden from the user. This test is still resident in
memory and is taking up memory space, this test can be
reviewed / downloaded at a later date. Since the test is still
resident in memory the View Memory Capacity figure may
seem false. i.e whilst you may think you have no results
stored and the View Memory Capacity indicates there are
results stored, previously deleted appliances are resident in
memory. In this situation to remove all resident tests select
clear results memory.
How to upload test details to your Supernova
To upload test details to the Supernova memory first connect the
serial port of the Supernova to the appropriate port on your PC using
a serial-download lead (9-9way or 9-25 Way). Please see the
optional accessories section of this manual for part numbers.
From the main menu on the tester use the cursor keys to select
REMOTE MODE, the tester is now ready to accept download data.
Follow the instructions supplied with your results recording software
to communicate with the tester. Once the communication is in
process the tester will show a count of tests being transferred. The
software and Supernova will display a message to say that the
transfer is complete. Once complete press the ABORT key and
return to the MAIN MENU. Disconnect the serial download lead and
the Supernova can be used as normal.
Clear Results Memory
This option will delete all of the appliances currently stored in memory
and should be used carefully!
A warning ‘Are You Sure ?’ prompt will appear. Press the No fast key
to return to the previous menu or press the Yes fast key to perform
the delete operation and return to the previous menu.