Seaward Supernova - Manual (Page 46)

How to perform Manual Tests
36
When the connection icon is flashing you cannot change any
settings.
note
You cannot change the settings for a test if you have
performed that test from within an appliance sequence. For
example after selecting Create Appliance No you can only
change the Earth Bond settings on the first Earth Bond test,
all sebsequent Earth Bond test will conform to the same
settings.
Press the Green button to start the test.
Press the Red button to abort the test at any time.
Note
In manual mode you will not get Abort Options, the test will
simply stop the test and revert to the Meter display. The
aborted test will not be stored.
If an Appliance Number has been created, the test result will be
stored under the entered number. To store tests to memory choose
Enter Comments / Save Results.
Enter Comments/Save Results
When you have completed a test you can enter comments which will
be referenced to the Appliance number.
---------ENTER COMMENTS----------