Seaward Supernova - Manual (Page 55)

45
Test Settings Editor
The Test Settings Editor allows the test sequence for the selected
test to be examined and changed if required:-.
Use the cursor keys to highlight a field to be changed and press
Enter to select the desired option.
Name
Each Sequence is given a name, this is to help the user when
selecting Sequences during automatic testing. When Name is
highlighted press the Green button, then use the keyboard to enter a
new name for the Test Sequence (of up to 15 characters) and press
Enter to confirm.
Test Parameter Fields
By selecting one of the test parameter fields from the Test Settings
Editor, a list of options for that field will be displayed:-
---------------DEFAULT SEQUENCE EDITOR----------------
-
OUTPUT LIMIT DUR NUM
SOCKET 230V
VISUAL YES 1
EARTH BOND 4A 0.10 Ω 5 1
INSULATION 500V 0.50M Ω 5 1
SUB LEAKAGE SKIP
FLASH SKIP
LEAKAGE SKIP
TOUCH LEAKAGE SKIP
POLARITY SKIP
NAME: IT EQUIPMENT
TESTCODE 1: I0G2000122
TESTCODE 2: R222111111
PRINT TESTCODES
STORE SETTINGS