Seaward Supernova User Manual
Page 21

Quick Reference
11
SETUP MENU. The unit will then display the message STORING
SYSTEM DATA. This will only be done if changes have been made, if
no changes have been made then the system data will not be
updated.
Waiting for a Yes/No response
When you are prompted to respond with YES or NO you must use
the fastkeys under the display.
Using Symbols in Text Fields
Although there is an option to use non-ascii symbols as Appliance
numbers, Site & Location descriptions, User names and comments
does not guarntee that your computer software will support them. If
you are unsure avoid using symbols.
10 Digit Restriction
When you first receive your Supernova the Appliance and Comments
will be set to ‘10 Digit Restriction’. If you are using compatible
software then this option can be set to ‘Full Length’. When set to ‘Full
Length’ the maximum Appliance length is extended to 15 characters
while the maximum line for the comments is extended to 20
characters per line.
Comparing Flash test results with other testers