Seaward Supernova - Manual (Page 20)

Quick Reference
10
On delivery of the Supernova it is necessary to ensure that the
correct time and a date are stored. Once stored the time/date is
retained in memory and does not need to be entered again. To edit
the date: from the MAIN MENU select SETUP, select, CHANGE
TIME/DATE, use the cursor keys to highlight the digit to be changed.
To store the changed time/date setting return to the MAIN MENU.
The unit will then display the message STORING SYSTEM DATA.
Entering a User Name
On delivery of Supernova it is necessary to ensure that a user
name(s) is stored. To edit the user list: from the MAIN MENU select
SETUP, select EDIT USER LIST / OPTIONS, use the cursor keys
and select a name, a screen will appear "EDIT USER SETTINGS",
press Green button, use the keyboard to type in the desired name
and press GREEN BUTTON to return to the previous menu.
Storing Appliance Test Results in Automatic mode
The Appliance Test Results will not be stored until you leave the
COMMENTS MENU, upon leaving this menu the unit will display the
messages STORING RESULTS then SAVED OK. Your results have
now been stored.
Storing Appliance Test Results in Manual mode
The Appliance Test Results will not be stored until a Manual
Appliance Sequence has been completed. To do this firstly press A,
this will prompt you for an Appliance number, enter this and press
GREEN BUTTON twice. Perform the tests required then press C,
this will prompt you to enter comments, select SAVE
COMMENTS/RESULTS and press GREEN BUTTON. The unit will
then display the messages STORING RESULTS then SAVED OK.
Your results have now been stored.
Storing System Data
System Data consists of everything changed from within the SETUP
MENU. To store the System Data return to the MAIN MENU from the