Seaward Supernova User Manual
Page 30

How to perform Automatic Tests
20
Use the cursor keys to highlight the PERFORM TEST option and
press Green button to commence the test sequence.
Press the Red button to return to the previous menu.
Note:
If you enter the wrong testcode into the wrong field the
Supernova will identify this and correctly enter the testcode. If
using codes from previous Seaward models you can enter
these in either field. These codes will then be automatically
translated into Supernova format.
Perform Test
Use the cursor keys to highlight the Perform Test option and press
Green button to perform the test. Pressing the Red Button will return
to the previous menu.
The screen will change to the Meter Display (see separate section -
How to use the Meter Display for an explanation).
If a visual test is included as part of the test sequence, the following
screen will be displayed:-
Use the Pass and Fail fast keys to proceed to the next test. Similar
screens will be displayed for Lead and Fuse checks.
After the visual tests, the test sequence will continue into the first
actual electrical test of the test sequence.