Seaward PATGuard Elite SQL - Manual (Page 72)

Seaward PATGuard Elite SQL 2 User Manual
- 70 - Rev. 1.4
Note
Should the update fail part way through for whatever reason, perhaps the cable is accidentally disconnected then it
is not necessary to re-establish communication. By selecting the button Send Another Software Update File the
file can be re-selected and sent again.
To complete the update process on the tester, power off the tester then power back on after about 5 seconds
checking that the new software version number is displayed.
It is necessary to restore FACTORY SETTING, CLEAR RESULTS MEMORY and CLEAR UPLOAD MEMORY
on the tester to enable the new software to function correctly (see the tester Instruction Manual).
Tester Logo Transfer
This program is used to transfer a label title and a logo to the tester for use with the Seaward Test ‘N’ Tag System.
Full details on using this are provided with the Test ‘N’ Tag System. This program has no use other than with the
Test ‘N’ Tag System.
PrimeTest Data Transfer
This Utility program is a copy of the program supplied on a CD with the PrimeTest 300 and 350 testers. Refer to
the tester Operating Instructions on how to use this program.