Seaward PATGuard Elite SQL - Manual (Page 45)

Seaward PATGuard Elite SQL 2 User Manual
- 43 - Rev. 1.4
The Test Instrument and Serial No. fields are automatically filled in from the selected download Tester. Some
testers contain this information within the download data, in which case this will take precedence over the selected
download tester. If the Testcode is sent by the PAT tester then it will be displayed in the Testcode fields. This
Testcode defines the test that was carried out to obtain the results shown.
Note
Only the Seaward Supernova and Europa family of PAT Testers are capable of sending the Testcode within the SSS
download format.
The Test Details are displayed according to Test Type, Result, Unit and Status. Test Results cannot be amended
on this screen. The Delete Result button will allow an individual result to be deleted. The Add Result will allow a
test to be added.
Note
Users can be prevented from deleting results if their Access Status is set accordingly (see User Accounts).
The Comments field can contain comments or text that was added at the end of the test by the PAT test operator
depending on PAT Options (see Options). The Comments field can be edited, simply by selecting the field with
the mouse and making changes. Any changes made will only be saved if the OK button is selected to leave the
screen.
Manually Entering Test Results
Where Test Results cannot be downloaded into the program, it is possible to enter the results manually. This would
be the case if the PAT tester did not have a memory and therefore was incapable of being downloaded or to enter
the results for Intermediate Visual tests only.
To enter a result directly, use the Add Results… button in the Test Results dialog box. This will cause the Test
Details dialog box to be displayed.
Use the Test Instrument dropdown box to select an already registered tester or manually enter the tester details
into the Test Instrument and Serial No. fields. The Testcode fields will normally not be valid for manual entry.
Use the Add Result button to create a Test Result line. Use the drop down boxes to enter the Test type, Result,
Unit and Status. Repeat the above for each Individual test. Use the OK button to save and leave this window. Test
Types other than default can be entered and these will be added to the drop down list for future use.
Fast Visual Pass Entry
The program enables Visual Test Passes to be entered quickly directly in the main window. At a Site, Location or
Asset level use the context menu (right mouse action) and select Add Visual Test Pass all Assets at and below that
level will have new Visual Tests added once the acknowledgement is accepted. All the tests will be passes, with the
current date and Login name as the User name.