Seaward PATGuard Elite SQL - Manual (Page 70)

Seaward PATGuard Elite SQL 2 User Manual
- 68 - Rev. 1.4
Utility Software
The Start Menu program group contains two SNEU Utilities programs for use with Supernova and Europa type
testers; Tester Software Update and Tester Logo Transfer. These programs have specific actions which help
support the Seaward Supernova / Europa range of testers.
There is also a PrimeTest Utilities program for use with the PrimeTest 300 / 350 testers: PrimeTest Data Transfer
Tester Software Update
This program is used to update the software in the Supernova / Europa testers.
CAUTION
Do not use this program to update the software in your tester as you may install the wrong software and thus
disable the tester. This program is for use with certain accessories which require other tester software to be
installed. Information on how to do this is provided with these accessories. It may also be used at the request of
Seaward Technical Support or their representatives who may provide a software file.
The following is guidance on using this program should you be requested to do so.
CAUTION
Before updating the tester and any PC software; download the tester (if the results in memory are of value) as it is
necessary to CLEAR RESULTS MEMORY and CLEAR UPLOAD MEMORY after the update. Failure to comply with the
above will render any results irretrievable after update.
Connect the tester serial port to the PC serial port with the Download Lead supplied.
Run the Tester Software Update program. The following screen is displayed:
Figure 54: Tester update dialog box
Follow the instruction on the screen to put the tester into Software Update mode.
Note