REMKO EFS 25-35 User Manual
Page 11
Operating and setting values
2
1
4
3
5
6
Fig. 4: Display of operating and setting values
1
This symbol is displayed if an error occurs
2
Symbol for time control of functions. This symbol is displayed if:
• a time limit/time control is set
• the status of the time limit/time control is displayed
• the time limit blocks a temperature control (symbol flashes)
3
Number of the time window that is currently set/displayed in the setting menu or that actually
includes the current time. The time control of a functions consists of 1 or 3 time windows that can be
set.
Example:
Time window 1: 06:00 - 08:00
Time window 2: 11:00 - 12:30
Time window 3: 17:00 - 19:00
4
Additional information:
On, off: Switching status/switching condition on, off
max, min: maximum value, minimum value
Σ: cumulative operating value since initial commissioning, cannot be reset
Δ: cumulative operating value since the last reset to 0
5
Display of:
• Measured values
• Set values
• Error codes
• Additional information, e.g. software version
6
Physical unit of the value displayed in no. 5: °C, l/min, %‚ h, kWh, MWh
11