D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 79)

CLI Examples 79
12 Port Routing
Example 2. Enabling Routing for Ports on the Switch
Use the following commands to enable routing for ports on the switch. The default link-level
encapsulation format is Ethernet. Configure the IP addresses and subnet masks for the ports.
Network directed broadcast frames are dropped and the maximum transmission unit (MTU)
size is 1500 bytes.
config
interface 0/2
routing
ip address 192.150.2.2 255.255.255.0
exit
exit
config
interface 0/3
routing
ip address 192.130.3.1 255.255.255.0
exit
exit
config
interface 0/5
routing
ip address 192.64.4.1 255.255.255.0
exit
exit