beautypg.com

Configuring an snmp v3 user profile – D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 User Manual

Page 29

background image

Starting the Web Interface

29

2 Using the Web Interface

Figure 2. Web Interface Panel-Example

Configuring an SNMP V3 User Profile

Configuring an SNMP V3 user profile is a part of user configuration. Any user can connect to
the switch using the SNMPv3 protocol, but for authentication and encryption, additional steps
are needed. Use the following steps to configure an SNMP V3 new user profile.

Figure 3.

Configuring an SNMP V3 User Profile

1. From the LAN navigation menu, select LAN> Administration>User Accounts (see

Figure 3).