D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 72)

72 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
Use the LLDP Interface Configuration screen to specify transmit and receive functions for
individual interfaces.
Figure 28. LLDP Interface Configuration
Interface Parameters
•
Interface — Specifies the port to be affected by these parameters.
• Transmit Mode — Enables or disables the transmit function. The default is disabled.
• Receive Mode — Enables or disables the receive function. The default is disabled.
• Transmit Management Information — Enables or disables transmission of management
address instance. Default is disabled.
• Notification Mode — Enables or disables remote change notifications. The default is dis-
abled.
• Included TLVs — Selects TLV information to transmit. Choices include System Name,
System Capabilities, System Description, and Port Description.