D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 71)

Using the Web Interface to Configure LLDP 71
10 Link Layer Discovery Protocol
Using the Web Interface to Configure LLDP
The LLDP menu page contains links to the following features:
• LLDP Configuration
• LLDP Statistics
• LLDP Connections
•
LLDP Configuration
Use the LLDP Global Configuration page to specify LLDP parameters.
Figure 27. LLDP Global Configuration
The LLDP Global Configuration page contains the following fields:
• Transmit Interval (1-32768) — Specifies the interval at which frames are transmitted.
The default is 30 seconds.
•
Hold Multiplier (2-10) — Specifies multiplier on the transmit interval to assign to TTL.
Default is 4.
•
Re-Initialization Delay (1-10) — Specifies delay before a re-initialization. Default is 2 sec-
onds.
•
Notification Interval (5-3600) — Limits the transmission of notifications. The default is
5 seconds.