D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 34)

34 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
(DWS-3024) (Interface 0/4)#exit
(DWS-3024) (Config)#exit
Example #4: Assign VLAN3 as the Default VLAN
This example shows how to assign VLAN 3 as the default VLAN for port 0/2.
(DWS-3024) #config
(DWS-3024) (Config)#interface 0/2
(DWS-3024) (Interface 0/2)#vlan pvid 3
(DWS-3024) (Interface 0/2)#exit
(DWS-3024) (Config)#exit
Example #5: Assign IP Addresses to VLAN 2
(DWS-3024) #vlan database
(DWS-3024) (Vlan)#vlan association subnet 192.168.10.10 255.255.255.0 2
(DWS-3024) (Vlan)#exit
(DWS-3024) #show vlan association subnet
IP Address IP Mask VLAN ID
---------------- ---------------- -------
192.168.10.10 255.255.255.0 2
(DWS-3024) #
Web Interface
You can perform the same configuration in the CLI Examples section by using the Web
interface. To create VLANs and specify port participation, use the LAN> L2 Features >
VLAN> VLAN Configuration page.
Figure 5. VLAN Configuration