D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 16)

16 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
• Management
- RADIUS
-
TACACS+
- DHCP Filtering
- Traceroute
- Configuration Scripting
-
Outbound Telnet
- Pre-Login Banner
- Simple Network Time Protocol (SNTP)
- Syslog
-
Port Description
CLI/Web Examples - Slot/Port Designations
To help you understand configuration tasks, this document contains examples from the CLI
and Web Interfaces. The examples are based on the D-Link DWS-3000 switch and use the
slot/port naming convention for interfaces, e.g. 0/2
Audience
Use this guide if you are a(n):
•
Experienced system administrator who is responsible for configuring and operating a net-
work using the D-Link DWS-3000 switch
• Level 1 and/or Level 2 Support provider
To obtain the greatest benefit from this guide, you should have an understanding of the Unified
Switch. You should also have basic knowledge of Ethernet and networking concepts.
CLI Documentation
The DWS-3000 CLI Command Reference gives information about the CLI commands used to
configure the switch. The document provides CLI descriptions, syntax, and default values.
Refer to the DWS-3000 CLI Command Reference for information on:
• D-Link DWS-3000 switch command overview
• Command structure