D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 170)

170 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
Example #5: logging port configuration
(DWS-3024) #config
(DWS-3024) (Config)#logging ?
buffered Buffered (In-Memory) Logging Configuration.
cli-command CLI Command Logging Configuration.
console Console Logging Configuration.
host Enter IP Address for Logging Host
syslog Syslog Configuration.
(DWS-3024) (Config)#logging host ?
Enter Logging Host IP Address
reconfigure Logging Host Reconfiguration
remove Logging Host Removal
(DWS-3024) (Config)#logging host 192.168.21.253 ?
Press Enter to execute the command.
Enter Port ID from 0 to 65535
(DWS-3024) (Config)#logging host 192.168.21.253 4 ?
Press Enter to execute the command.
Enter Logging Severity Level (emergency|0, alert|1,
critical|2, error|3, warning|4, notice|5, info|6,
debug|7).
(DWS-3024) (Config)#logging host 192.168.21.253 4 1 ?
Press Enter to execute the command.
(DWS-3024) (Config)#logging host 192.168.21.253 4 1
(DWS-3024) (Config)#exit
(DWS-3024) #show logging hosts
Index IP Address Port Status
----- ----------------- ---- -------------
1 192.168.21.253 4 Active