D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 26)

26 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
Quick Start up Downloading from TFTP Server
Before starting a TFTP server download, the operator must complete the Quick Start up for the
IP Address.
Quick Start up Factory Defaults
Table 7. Downloading from TFTP Server
Command Details
copy //
> nvram:startup-config
(Privileged EXEC Mode)
copy //
> system:image
(Privileged EXEC Mode)
Sets the destination (download) datatype
to be an image (system:image) or a con-
figuration file (nvram:startup-config).
The URL must be specified as:
tftp:////.
The nvram:startup-config option down-
loads the configuration file using tftp and
system:image option downloads the code
file.
Table 8. Setting to Factory Defaults
Command Details
clear config
(Privileged EXEC Mode)
Enter yes when the prompt pops up to clear all the configu-
rations made to the networking device.
write Enter yes when the prompt pops up that asks if you want to
save the configurations made to the networking device.
reload (or cold boot the network-
ing device)
(Privileged EXEC Mode)
Enter yes when the prompt pops up that asks if you want to
reset the system.
You can reset the networking device or cold start the net-
working device.