D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 64)

64 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
CLI Examples
The following are examples of the commands used in the Port Security feature.
Example #1: show port security
(DWS-3024) #show port-security ?
Press Enter to execute the command.
all Display port-security information for all
interfaces
Display port security information for a
specific interface.
dynamic Display dynamically learned MAC addresses.
static Display statically locked MAC addresses.
violation Display the source MAC address of the last
packet that was discarded on a locked port.
Example #2: show port security on a specific interface
(DWS-3024) #show port-security 0/10
Admin Dynamic Static Violation
Intf Mode Limit Limit Trap Mode
------ ------- ---------- --------- ----------
0/10 Disabled 600 20 Disabled
Example #3: (Config) port security
(DWS-3024) (Config) #port-security ?
Press Enter to execute the command.
(DWS-3024) (Config) #port-security