Example #1: show network, Example #2: show telnet, Example #3: transport output telnet – D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 User Manual
Page 156: Example #4: session-limit and session-timeout
156
© 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
Example #1: show network
(DWS-3024) >telnet 192.168.77.151
Trying 192.168.77.151...
(DWS-3024)
User:admin
Password:
(DWS-3024)>enable
Password:
(DWS-3024)#show network
IP Address...............................192.168.77.151
Subnet Mask..............................255.255.255.0
Default Gateway..........................192.168.77.127
Burned In MAC Address....................00:10:18.82.04:E9
Locally Administered MAC Address.........00:00:00:00:00:00
MAC Address Type.........................Burned In
Network Configuration Protocol Current...DHCP
Management VLAN ID.......................1
Web Mode.................................Enable
Java Mode ...............................Disable
Example #2: show telnet
(DWS-3024)#show telnet
Outbound Telnet Login Timeout (minutes)........5
Maximum Number of Outbound Telnet Sessions.....5
Allow New Outbound Telnet Sessions.............Yes
Example #3: transport output telnet
(DWS-3024) (Config)#lineconfig ?
(DWS-3024) (Config)#lineconfig
(DWS-3024) (Line)#transport ?
input Displays the protocols to use to connect to a
specific line of the router.
output Displays the protocols to use for outgoing
connections from a line.
(DWS-3024) (Line)#transport output ?
telnet Allow or disallow new telnet sessions.
(DWS-3024) (Line)#transport output telnet ?
(DWS-3024) (Line)#transport output telnet
(DWS-3024) (Line)#
Example #4: session-limit and session-timeout
(DWS-3024) (Line)#session-limit ?